Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
Selecting and Enabling an Effect Model
1. Use the MODEL KNOB to select an Effect Model. (Refer to the Effect Model Control table for a list of Effect Models.) 2. Rock the pedal forward and press firmly on the TOE SWITCH. The INDICATOR LED lights green to show that the Effect Model is enabled. 3. To bypass the Effect Model, rock the pedal forward and press firmly on the TOE SWITCH. The INDICATOR LED turns off to show that the Effect Model is bypassed.
