PANASONIC EY6813
Instrukcja Obsługi

Support handle

Place the support handle at your favorite position and tighten the handle securely.

Note:

Use under extremely hot or cold conditions will reduce operating capacity per charge.

Release lever

Battery pack Installation and Removal

-For removalPull the release lever to free the battery holder.
Loosen Tighten Battery holder

Depth gauge

Loosen the support handle and adjust the depth gauge at your favorite depth. After adjusting, tighten the support handle and fix depth gauge.

Release lever

-For installationFit the battery holder unit it clicks in position.

Depth gauge Depth of drilling

Battery pack

For Appropriate use of Ni-MH Battery Pack EY9210 Charge the Ni-MH battery fully before storage in order to ensure a longer service life. The ambient temperature range is between 0°C (32°F) and 40°C (104°F). If the battery pack is used when the battery temperature is below 0°C (32°F), the tool may fail to function properly. In that case, charge the battery until charging is completed for appropriate functioning of the battery.

Note: Charge a new battery pack, or a battery pack that has not been used for a prolonged time, for about 24 hours to bring the battery up to full charge. 1. Plug the charger into an AC outlet. 2. Insert the battery pack firmly into the charger.

Battery charger (EY0214)

Battery pack life

The rechargeable batteries have a limited life. If operation time becomes extremely short after recharging, replace the battery pack with a new one.

To AC outlet Battery pack

Battery charger

-8-