ROLAND FANTOMXR
Instrukcja Obsługi

Creating a Rhythm Set

Adjusting the Volume (TVA/TVA Env)
For details on these settings, refer to �How to Make Rhythm Set Settings� (p. 71).

Alternate Pan Depth

This setting causes panning to be alternated between left and right each time a key is pressed. Higher settings will produce a greater amount of change. �L� or �R� settings will reverse the order in which the pan will alternate between left and right. For example if two rhythm tones are set to �L� and �R� respectively, the panning of the two rhythm tones will alternate each time they are played. Value: L63�0�63R

Rhythm TVA
Tone Level (Rhythm Tone level)
Sets the volume of the rhythm tone. Use this parameter to adjust the volume balance between rhythm tones. Value: 0�127

This will affect only waves whose Wave Alter Pan Sw parameter (p. 76) is ON or REV.

Rhythm TVA Env
A-Env T1 V-Sens (TVA Envelope Time 1 Velocity Sensitivity)
This allows keyboard dynamics to affect the Time 1 of the TVA envelope. If you want Time 1 to be speeded up for strongly played notes, set this parameter to a positive (+) value. If you want it to be slowed down, set this to a negative (-) value. Value: -63� +63

The volume levels of the Waves from which the rhythm tone is composed is set with the WMT1�4 Wave Level parameter (p. 76).

Level V-Curve (Level Velocity Curve)
You can select from seven curves that determine how keyboard playing strength will affect the volume. If you do not want the volume of the rhythm tone to be affected by the force with which you press the key, select �FIXED.� Value:
fig.06-036

FIXED, 1�7

A-Env T4 V-Sens (TVA Envelope Time 4 Velocity Sensitivity)
The parameter to use when you want key release speed to control the Time 4 value of the TVA envelope. If you want Time 4 to be speeded up for quickly released notes, set this parameter to a positive (+) value. If you want it to be slowed down, set this to a negative (-) value. Value: -63� +63

1

2

3

4

5

6

7

Level V-Sens (Level Velocity Sensitivity)
Set this when you want the volume of the rhythm tone to change depending on the force with which you press the keys. Set this to a positive (+) value to have the changes in rhythm tone volume increase the more forcefully the keys are played; to make the tone play more softly as you play harder, set this to a negative (-) value. Value: -63� +63

A-Env Time 1�4 (TVA Envelope Time 1�4)
Specify the TVA envelope times (Time 1� Time 4). Higher settings will lengthen the time until the next volume level is reached. (For example, Time 2 is the time over which Level 1 will change to Level 2.) Value: 0�127

Tone Pan (Rhythm Tone Pan)
Sets the pan for the rhythm tone. �L64� is far left, �0� is center, and �63R� is far right. Value: L64�0�63R

A-Env Level 1�3 (TVA Envelope Level 1�3)
Specify the TVA envelope levels (Level 1�Level 3). These settings specify how the volume will change at each point, relative to the standard volume (the Rhythm Tone Level value specified in the TVA screen). Value:
fig.06-041.e

Set the Pan for Waves comprising the rhythm tones with the Wave Pan parameter (p. 76).

0�127
T1 T2 T3 T4

Random Pan Depth
Use this parameter when you want the stereo location to change randomly each time you press a key. Higher settings will produce a greater amount of change. Value: 0�63
Level

This will affect only waves whose Wave Rnd Pan Sw parameter (p. 76) is ON.

L1 L2 Note on T: Time L: Level

L3 Note off

Time

80