...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 54 (kliknij aby zobaczyć)
4.1.7 CIS Unit
(1) Turn the top cover upside down. (2) Remove the three screws from the CIS shield plate. The FG wire and feed roller grounding spring also come off. (3) Disconnect the CIS harness from the CIS unit. (4) Turn the top cover rightside up. (5) Slightly pull up the lock arm, move the CIS unit to the left, and lift up the right edge of the CIS unit. (6) Remove the two CIS springs.
Reassembling Notes
� When reinstalling the CIS unit, first insert the left end under the lock arm, put the CIS unit into the top cover, and move it to the right. After installation, wipe fingerprints or dust off the CIS surface with a soft cloth. � When reinstalling the CIS shield plate, secure it to the top cover together with the feed roller grounding spring and FG wire. The FG wire should be routed as illustrated in Subsection 4.1.26, "Harness routing C." � Route the CIS harness on the underside of the top cover as illustrated in Subsection 4.1.26, "Harness routing C."
4 -1 9
