Appliance door opening device (Fig. 4-5)
The accessories pack supplied with the appliance contains a device to allow the kitchen unit and appliance doors to be opened simultaneously.
Fig. 5
C A B
The device consists of guide (A), blocks (B), securi n g s c re w s a n d block covers (C). To � x g u i d e ( A ) , drill the door as shown in Fig. 4.
C
D118
To �t blocks (B), proceed as follows: open the appliance and kitchen unit doors to about 90°; position block (B) on the inside of the unit door as shown in Fig. 5; then secure it to the unit door, positioning the screws at the far left-hand end of the elongated holes in the block (Fig. 5); pressing lightly, slide the block towards the left (the elongated holes are provided for this purpose) until the device engages on the guide, so allowing simultaneous opening of both doors. After having �tted the bottom block (and engaging it on the bottom guide) fully tighten the securing screws on both blocks. Fit the block covers (C) (Fig. 5); pressing them into place. The doors can be opened using the sliding system previously illustrated, or one of the two doors can be opened by �tting the small handle supplied as an accessory (see �gure).
Fig. 6