Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
5. When the oven temperature goes above normal baking/roasting temperatures, the door cannot be opened and the Lock Lever must not be moved. 6. After the Self-Cleanlng cycle is completed and the oven has cooled sufficiently, the Lock Lever can be moved back to the left. DO NOT FORCE IT. Wait until it moves easily. Turn the Oven Selector and Oven Temperature Control Knob to OFF. 7. After the oven is cool, wipe off any residue or ash with a damp cloth. If needed, touch up spots with a soapy steel-wool pad.
To stop the Self-Cleaning cycle before cycle is completed:
Turn the Oven Selector and Oven Temperature Control Knob to OFF. When the oven has cooled sufficiently, move the Lock Lever back to the left. DO NOT FORCE lT. Wait until it moves easily.
To cancel the Self-Cleaning cycle before cycle starts:
Turn the Oven Selector and Oven Temperature Control Knob to OFF. Push the Start Time button twice. Move the Lock Lever back to the left.
Special
l
tips
Keep the kitchen well ventilated during the SelfCleaning cycle to help gel rid of heat, odors and smoke. l After the oven is cool, wipe up any residue or ash with a damp cloth or sponge. If any spots remain, clean with a mild abrasive cleanser or mildly abrasive pad. . Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual. l If the Setf-Cleaning cycle does not get the oven as clean as you expected, the cycle may not have been set long enough or you may not have prepared the oven properly. Set the SelfCleaning cycle longer the next time and handclean areas noted on page 19.
