Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 19 (kliknij aby zobaczyć)
CARING FOR YOUR RANGE
SEALED SURFACE BURNERS AND COOKTOP
Cleaning the surface burners
� You should routinely remove and clean the burner
cap. Always clean the burner cap after a spillover. Keeping the burner cap clean prevents improper ignition and an uneven flame. Porcelain burner cap Contoured well area Ignitor Burner base Gas tube opening
� For the proper flow of gas and ignition of the � Gas must flow freely through the gas tube
burner, do not allow spills, food, cleaning agents, or any other material to enter the gas tube opening or burner ports. opening for the burner to light properly. You must keep this area free of any soil and protect it from boilovers or spillovers. Always keep the burner cap in place whenever a surface burner is in use.
� Let the cooktop cool before cleaning. � Do not use oven cleaners, bleach, or rust
removers. � Do not obstruct the flow of combustion and ventilation air. � Be careful not to allow moisture to collect in the burner control knob areas. Moisture can cause the ignitor switches to fail.
� Occasionally check the burner flames for proper
5" 8
size and shape as shown. A good flame is blue in color. If the flames are uneven, you may need to clean the burner ports.
