Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
2. Disassembly
2-4.Removing DSC BLOCK
Remove in the order indicated by circled numbers. <Step 1>
3 2
FinePix S2 Pro (U/E) SERVICE MANUAL
(1) Pull out CR SPACER ASSY from the camera body in the direction of the arrow. (2) Remove eight screws(BB14857-100, M1.7x3.0). (3) Remove DSC BLOCK in the direction of the arrow.
1 2
2
<Step 2>
(4) Remove the harness from connector (CN300) of MAIN PWB ASSY. (5) Remove the lock of connector (CN500) of MAIN PWB ASSY, and remove FFC.
5
4
[Notes of assembly of DSC BlOCK. ] (1) Note diagonal insertion and the half insertion when you lock FFC and the harness to the connector. (2) Confirm there is no space when "DSC BLOCK" and "MAIN BODY" are combined, and the screw is tightened.
