Hardware Page
The Hardware page gives you access to important information and functions of the FireWire Solo.
Sample Rate Detected
This �eld displays the currently-detected sample rate from the currently selected incoming sync source.
ASIO/WDM Buffer Size
In this �eld you can select the buffer size you wish to work with. Smaller buffer sizes result in lower latency (latency refers to the time it takes for your input signal to pass through your audio software and appear at the outputs), but may not function well with slower systems.
Sync Source
This �eld allows you to choose between the FireWire Solo�s INTERNAL clock and an EXTERNAL S/PDIF clock source.
S/PDIF Output Source
Selecting �mixer� routes the signals assigned to the S/PDIF output from the control panel mixer to the S/PDIF output. Selecting �Pass Thru� allows a surround-encoded stream such as AC3 or DTS to be sent to the S/PDIF output.
Contact Us
For additional help, technical support is available on our website at www.m-audio.com, where you can �ll out our technical support form. Alternatively, you can email us at
[email protected], or contact us by phone at: (626) 633-9055 Technical support is available by telephone from 7am - 7pm PST.
7
