Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
DESCRIPTION OF THE CONTROLS
Control panel
1
2
3
4
5
6
1. WASHING POWDER DISPENSER
The dispenser is provided with 4 compartments marked with the following symbols:
4. �NO SPINNING� BUTTON
Pressing this button before starting the intense washing program all spinnings will be excluded. The other steps of the program remain unchanged.
5. TEMPERATURE SELECTOR
This control allows you to select the temperature of the washing cycle in accordance with the kind of clothes to be washed. Turn the control until the required temperature coincides with the marker.
�Prewash� symbol shows the compartment for the prewash detergent. �Wash� symbol shows the compartment for the washing detergent. �smooth� symbol shows the compartment for the smoothing additives. �bleach� symbol shows the compartment for the bleaching additives.
On the program table you will find the most apropriate temperature for each kind of washing. Selecting F any program can be run through with cold water. This will ensure a saving in electricity consumption.
6. PROGRAM SELECTOR
To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program (reference mark on the control panel). If at any chance you pass by the required number NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required number is reached again.
2. ON/OFF LAMP
It lights when the appliance is operating.
3. 1/2 LOAD BUTTON
Pressing this button before starting the intense program there will be one rinse less which leads to energy and water saving.
