Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
Existing Construction
Level
�1-1/2" �1-1/2" �1-1/2"
Template
Tape
Step One: Remove the grille from the speaker frame.
Step Two: Determine the correct speaker location.
Step Three: Determine the speaker-frame location.
Kerf Line
Step Four: Cut the dry wall.
Step Five: Place the mounting bracket on the speaker frame using the mounting guides (marked 3/8" , 1/2" 5/8" and 3/4") corre, , sponding to the thickness of the dry wall.
Step Six: Place the frame assembly in the wall.
Step Seven: Connect the speaker wires to the baffle assembly and install baffle assembly in frame. Do not overtighten the baffle screws.
