Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 88 (kliknij aby zobaczyć)
Sending Documents From Memory
3
Enter the number of the receiving machine using one of the following methods:
� Press a Rapid Key. � Press the SPEED DIAL key and
01
02
03
(Example)
enter a Speed Dial number.
� Enter a full telephone number by
pressing the number keys.
4
Press the START/MEMORY key if you entered a Speed Dial number or a full number.
� The document will be scanned and
START/MEMORY
stored in memory. Your fax will then dial the receiving machine and transmit the document (redialling will be done automatically if necessary).
If the memory becomes full... If the memory becomes full while the document is being scanned, MEMORY IS FULL will appear in the display.
� Press the START/MEMORY key if you want to transmit the
pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up.
� Press the STOP key if you want to cancel the entire transmission.
