PANASONIC FPD455
Instrukcja Obsługi

2 Bin Finisher, Inverting Unit, Exit Guide Unit FA-F365
(3) When replacing the staple cartridge
Add staple

OK

The message shown on the left appears of the printer when the staples are out.

1 2
Lock Knob

Open the stapler cover.

Stapler cover

$ Pull out the staple unit until it stops. # Turn the lock knob in the counter clockwise direction.

3 4
NOTE

$ Install the new cartridge.

# Remove the empty staple cartridge. Check if there is any remaining staples.

% Return the staple unit until it stops and turn the lock knob in clockwise direction. Check the operation Select the staple-sort mode with control panel and print the desired data.

C If the unit fails to staple after replacing the staple cartridge follow the instructions below. # Remove the staple cartridge. $ Pull down the stapler toward you. % Press the release knob and swing the staple jam lever back and forth. If the unit still fails to work, contact your service technician.

42