JVC FS-5000J
Instrukcja Obsługi

English

� �

Press the ¢ button once to skip to the beginning of the next track. Press the 4 button to skip to the beginning of the track being played. Press twice quickly to skip to the beginning of the previous track.

To cancel the programming before playing, press the CANCEL button in above step 4, 5 or 6. To confirm the programmed tracks, press the PROGRAM button; the tracks making up the program will successively be displayed in the programmed order.

Search Play ������������
Holding down the 4 or ¢ button on the Unit or the Remote Control, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.

Programming the Playing Order of the Tracks
You can program the playing order of the tracks using the Remote Control. s You can program up to 20 tracks in any desired order.

Track number

Programme order number

s

You can only make a program when the CD Player is stopped.

s Insert a CD. 1. s Press the CD 38 button. 2. s Press the e button to stop the CD. 3. s Press the PROGRAM button. 4.
The System enters the programming mode and the �PRGM� indicator lights up.

To stop playing, press the e button once. To delete all the tracks in a program, press the 7 button (or the CANCEL button on the Remote Control)ýwhile the CD Player is stopped. The �PRGM� indicator goes out and the program is deleted. Normal Play is resumed. The program will also be deleted when you press the 0 button to open the CD holder. Note: If the total playback time of the programmed tracks exceeds 99 minutes 59 seconds, the total playback time will go out on the display.

Random Play
The tracks will play in no special order when you use this mode.

PROGRAM

Press the RANDOM button on the Remote Control.
Playback automatically starts and the �RADM� indicator lights up on the display. To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. Press the 4 button to jump back to the start of a track being played. To cancel random play, press the RANDOM button again. The �RADM� indicator goes out and Normal Play is resumed.

s Press the UP, DOWN, >, or 5.

< button to

select the track to program.
UP button: Increases the track number by 1. DOWN button: Decreases the track number by 1. > button: Increases the the track number by ten. < button: Decreases the track number by ten. � Example: for track 2, press the UP button twice. For track 12, press the > button, then press the UP button twice (or simply press the UP button 12 times).

Repeating Tracks
You can set the program or individual track playing to repeat as many times as you like.

s Press the SET button. 6.
UP SET DOWN

Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button, as shown below.
=
Total playback time of the programmed tracks

ALL =blank display = (back to the beginning)

s Repeat steps 5 and 6 to select the other 7.
tracks for the program.
You can see the total playback time of programmed tracks on the display.

s Press the CD 38 button. 8.
The System plays the tracks in the order you have programmed

: Repeats one track. In Random Play mode, this indicator is skipped ALL : In Normal Play mode, repeats all the tracks. In Program Play mode, repeats all the tracks in the program. In Random Play mode, repeats all the tracks in random order. To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out

s

them. You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.

11