Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 21 (kliknij aby zobaczyć)
Recording
IMPORTANT:
� It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. � The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. � If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. � You can use type I tape for recording.
Continued
Recording on a Tape
On the unit ONLY:
1
Put a recordable cassette in with the exposed part of the tape down.
To protect your recording
Cassettes have two small tabs on the back to protect from unexpected erasure or rerecording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape.
2
Close the cassette holder gently and check the recording direction for the tape.
� If the tape direction is not correct, press TAPE 2 3 twice then 7 to change the tape direction. � If you want to record on both sides of a tape, see �To record on both sides�Reverse Mode.�
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette deck become dirty, the following will occur: � Impaired sound quality � Discontinuous sound � Fading � Incomplete erasure � Difficulty in recording To clean the heads, capstans, and pinch rollers Use a cotton swab moistened with alcohol.
Capstans
3
Start playing the source�FM, AM or auxiliary equipment connected to AUX jacks.
� When the source is the CD player, see �Disc Direct Recording� on page 19.
4
Press REC (recording).
The REC (recording) indicator lights up on the display and recording starts.
REC
� If no cassette is inserted when you press REC �NO REC� appears on the display. � If a protected tape is inserted when you press REC �NO REC� appears on the display.
Heads Pinch Rollers
To stop while recording, press 7. To remove the cassette, press PUSH OPEN 0 on the unit. � If the tape is recording, stop it first.
0
To demagnetize the heads Turn off the unit, and use a head demagnetizer (available at electronics and audio shops).
At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording discs or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any loss.
DO NOT open the cassette holder when the tape is running.
To record on both sides�Reverse Mode
Press REV.MODE (reverse mode) repeatedly
REV. MODE
until or is lit. � When using the Reverse Mode for recording, lights up and start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape.
