JVC FSP5
Instrukcja Serwisowa

FS-P5
Remove the rear panel (See Fig.8 to 11)
Prior to performing the following procedure, remove the metal cover, rear cover and the CD mechanism Rear panel assembly. 1. Remove the seven screws G panel. attaching the rear
Joint a

F

Joint a

G G

2. Disconnect the card wire from CN902 on the main board. 3. Disengage the lower two joints b on each side of the rear panel using a screwdriver and remove the rear panel backward (The tuner board and the fan will be also detached.Remove them as needed).

G G
Fig.8
CN902 Fan Rear panel

Removing the fan (See Fig.9 and 12)
Prior to performing the following procedure, remove Main board CN908 the metal cover, the rear cover andthe CD mechanism assembly. 1. Disconnect the wire from connector CN908 on the main board. 2. Remove the two screws H on the back of the body. Fig.9 3. Move the fan upwards to disengage the four joints c and release from the rear panel.

Tuner board

Rear panel Rear panel Fan Joint c Joint c

Joint b

Fig.10

H
Joint c

H
Joint c Joint b Rear panel

Fig.12

Fig.11

1-9