Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
INSTALLATION
WHEN USING THE UNIT ON A TABLETOP FIXING THE STAND WHEN WALL MOUNTING
CAUTION
� When mounting the air purifier on a wall, the wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit. � Ensure that the wall is suitable for mounting the air purifier. � Do not install in a location with heavy smoke, such as in a kitchen, etc. The unit surface may crack as a result.
1 Remove the front panel.
� At this time, also remove the pre-filter, stamina-power carbon and the HEPA filter. Front panel 1
2
1
1 Determine the mounting location
Leave space around the bracket by referring to the illustration below. The unit cannot be mounted if there is insufficient spacing around the bracket.
2 Place the unit with its front
side facing down on a flat and stable surface.
� Place a soft cloth, etc., to prevent damaging the unit.
75cm or more 69cm or more from the ceiling Size of main unit 75cm or more 75cm or more
3 Insert the tabs on the stand
into the holes on the main unit and fix the stand using the supplied thumbscrews (2 units).
Tabs Holes
Mounting bracket 1 60cm or more from 60cm or more sidewall from sidewall
CAUTION
Mount on a flat surface
� Do not mount the unit to a thin wall with little strength such as a plasterboard, etc. The unit may fall and can be very dangerous.
