PHILIPS FW768P37
Instrukcja Obsługi

TIMER
Timer Setting
� The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will start to increase from the minimum level until the volume level before the set is switched to standby mode. 1 Press and hold CLOCK/TIMER for more than two seconds to select timer mode. � �AM 12:00� or the last set timer starts flashing. The TIMER flag flashes. � The last selected source is lit while other available sources are flashing. 2 Press CD, TUNER or TAPE to select the desired source. � Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2. 3 Press à or á to set the hour for the timer to start. 4 Press í or ë to set the minute for the timer to start. 5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER flag remains on the display.
28

SLEEPTIMER
� At the preset time, the timer will be activated. � The selected source will be played. To switch off the TIMER 1 Press CLOCK/TIMER for more than two seconds. 2 Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "OFF" and the TIMER flag disappears. To start the TIMER again (for the same preset time and source) 1 Press CLOCK/TIMER for more than two seconds. 1 Press CLOCK/TIMER again to store the start time. � The timer is now switched on. � The TIMER flag appears on the display.

Sleep Timer (only on remote control)
This feature allows you to select a length of time after which the system will switch to the standby mode automatically. � Press SLEEP TIMER on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � OFF � 60 � � �SLEEP XX� or �OFF� will be displayed. "XX" is the time in minutes. � When you reach the desired length of time, stop pressing the SLEEP TIMER button. � After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer � Press SLEEP TIMER repeatedly until "OFF" is displayed, or press the STANDBY ON button.

English

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the last selected disc. If the CD trays are empty, the TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead.