PHILIPS FWC1C37
Instrukcja Obsługi

22

TIMER
� To exit without storing the setting, press �. Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When a power interruption occurs, the clock setting is erased. 2 � 3 4 5 � The selected source is lit while other available sources are flashing. Press CD or TUNER to select the desired source. Before selecting CD, make sure a CD is loaded in the CD carousel tray. Press à or á to set the hour for the timer to start. Press í or ë to set the minute for the timer to start. Press CLOCK�TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. At the preset time, the timer will be activated. � The selected source will be played. To switch off the TIMER 1 Press and hold CLOCK�TIMER for more than two seconds. 2 Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "CANCEL" and the TIMER disappears. To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK�TIMER for more than two seconds. 2 Press CLOCK�TIMER again to store the start time. � The timer is now on. � The TIMER appears on the display.

SLEEP TIMER
Sleep Timer (only on remote
control) This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � OFF � 60 � � �SLEEP XX� or �OFF� will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. � After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer � Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Timer Setting
� The system can switch on to CD or TUNER mode automatically at a preset time. It can serve as an alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will increase from the minimum level to the most recently selected volume level. 1 Press and hold CLOCK�TIMER for more than two seconds to select timer mode. � �12:00 AM� or �00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. � The TIMER starts flashing.

�

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, the TUNER will be selected instead. � The timer will not activate if a recording is in progress.

pg 01-28/C1-C10/37-En

22

16/11/1999, 1:57 PM

3139 116 19292 (ENG)