PHILIPS FW-C70/37
Instrukcja Obsługi

13
Selecting the Source
� Press the respective source selection button: CD, TUNER, TAPE or AUX. � The display indicates the selected source. Note: � For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals.
PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz

OPERATING THE SYSTEM
TOP DOWN Display
STEREO BACK FRONT HSD
1KHz 2KHz 4KHz 8KHz

DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to adjust the system to suit your type of music. � Press DIGITAL SOUND CONTROL (DSC) to select OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL. � The selected digital sound is encircled. � �OPTIMAL X, CLASSIC, TECHNO X, JAZZ X, ROCK X or VOCAL X� will be displayed. "X" is the pre-selected level. With the SOUND 3 or 4 controls, you can change the level of any DSC setting except CLASSIC. � First select the DSC feature, then press the SOUND 3 or 4 until the desired digital sound setting level is reached. � The digital sound setting level will increase or decrease between level 1 and 5. Note: � For neutral setting, select CLASSIC and switch off DBB. DYNAMIC BASS BOOST (DBB) There are three DBB settings to enhance the bass response.

� Press DBB briefly to select a bass boost level. � The respective DBB level is being encircled and lit. � �BEAT�, �PUNCH� or �BLAST� will be displayed. To switch off DBB � Press DBB briefly until �DBB OFF� is displayed. Note: � Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. Automatic DSC-DBB selection The best DBB setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. MUTE (on remote control only) This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence. � Press MUTE on the remote control to switch off the sound. � �MUTE� will be displayed. � Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.

NITE MODE Display
PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz

STEREO BACK FRONT HSD

Selecting the Equalizer Display
You can select the desired equalizer display for the system. You must not press the DSC button on the system before using the SOUND 3 or 4 controls. � Press the SOUND 3 or 4 to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE. � The selected display will be shown. NORMAL Display
PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz

Note: � In NITE MODE, all lights will be switched off and the display brightness will be dimmed.

Sound Control
VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.

STEREO BACK FRONT HSD

pg 01-28/C50-C70/37-Eng

13

18/11/1999, 2:39 PM

3139 116 19441 (ENG)