DVD Menu Operations
Setting the screen saver Changing the password You can change the six-digit code used as Password.
1 2
In disc stop mode, press SETUP key on the remote control. Press 1 / 2/ 5 / 4 on the remote control to navigate in the menu.
If set to On, the screen saver will be activated when you leave the system in stop or pause mode for 5 minutes. The default setting is On. Night mode - turning on/off
� Move to �Preference Page� and press 4. � Move to �Password� and press 2. � Press OK. The TV screen will display below picture
Off Select this when you want to enjoy the surround sound with its full dynamic range. On Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level. This feature is only available for movies with Dolby Digital mode.
3
Use the numeric keys (0-9) to enter your sixdigit code. � The password supplied by default is 000000. � If you forget the six-digit code, press�136900�. to set password.
� Go to �Password� and enter your new code. Then, enter the same code again to confirm.
