DVD Menu Operations
English
32 Improving the image for progressive scan video output setting This feature is only applicable when you have connect this system to a Progressive Scan TV system throngh the Component Video jacks
PBC
Night mode - turning on/off
PBC
NIGHT MODE CEBTER DELAY
OFF ON
REAR DELAY
TEST TONE
TV SHAPE TV SYSTEM PROGRESSIVE SCR SAVER
OFF ON
NIGHT MODE SET TO OFF
PROGRESSIVE NOW OFF
Off Select this when you want to enjoy the surround sound with its full dynamic range. On Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level. This feature is only available for movies with Dolby Digital mode.
Off Select this a conventional TV set is connect to yor system. On To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV set is reqquired. You can press and hold OPEN / ClOSE on the panel and 1 on remote control for more than 5 seconds to exit progressive scan . Notes: - A progressive scan TV set is required. -The progressive scan video quality is only possible through PR PB Y output connection. Setting the screen saver
Test Tone
PBC
NIGHT MODE CEBTER DELAY
REAR DELAY
TEST TONE
OFF ON
TEST TONE OFF
PBC
If you have turned on the test tone, the test
TV SHAPE TV SYSTEM PROGRESSIVE SCR SAVER
OFF ON
signal will be automatically generated to help you judge the sound level of each speaker.
1
In disc mode, press SYSTEM MENU. � Use the 1 / ¡ / 5 / 4 keys on the remote to navigate in the menu.
SCREEN SAVER NOW ON
2
Highlight
icon and press 4.
If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 5 minutes. The default setting is ON.
3
Move to and press ¡. Move to {TEST TONE} and press ¡. Press 34 to select a setting.
