Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 41 (kliknij aby zobaczyć)
Timer Operations
To deactivate the timer � Press and hold CLOCK/TIMER until �SELECT CLOCK OR TIMER� is displayed. � Press O or P to change the display to �TIMER�. � Press CLOCK/TIMER again to confirm. � �TIMER OFF� will be displayed and TIMER will disappear. Notes: � In the disc mode, playback will begin with the first track of the last selected disc or other trays if the disc is empty. If all disc trays are empty, the system will automatically switch to Tuner mode. � During timer setting, if no button is pressed within 10 seconds, the system will exit timer setting mode automatically. � When the system is powered on, if the memorized volume level is less than 8, the system will automatically adjust to 8 increasingly. If the memorized volume level is more than 20, the system will adjust to 20. � The timer will be cancelled when the power cord is disconnected or if a power failure occurs.
Setting the sleep timer
The sleep timer enables the system to switch to Standby mode automatically at a preset time. � Press SLEEP on the remote control repeatedly and stop at the desired preset turn-off time. � The following options are available (time in minutes): 15 p30 p45 p60 p90 p120 pOFF p...... � �SLEEP� will show on the display panel unless �OFF� is selected. To check or change the setting � Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear on the display. To cancel the sleep timer � Press SLEEP repeatedly until �OFF� is displayed, or press the STANDBY ON button.
Viewing the timer 1 2
Press CLOCK/TIMER twice to view timer in any source mode. Timer will be shown on the display for 5 seconds. If no timer has been set, �NO TIMER� will be displayed for 5 seconds.
