Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 44 (kliknij aby zobaczyć)
Timer Operations
English
To deactivate the timer � Press and hold TIMER /SLEEP for more than 3 seconds. ��TIMER OFF� will be displayed. Notes: � If the source is disc mode, playback will begin with the first track of the last selected disc or other trays if the disc is empty. If all disc trays are empty, the system will automatically switch to Tuner mode. � During timer setting, if no button is pressed within 10 seconds, the system will exit timer setting mode automatically. � When the system is powered on, if the memorized volume level is less than 12, the system will automatically adjust to 12. � The timer will be cancelled when the power cord is disconnected or if a power failure occurs.
Setting the sleep timer
The sleep timer enables the system to switch to Standby mode automatically at a preset time. � In any source mode, Press TIMER/SLEEP on the remote control repeatedly and stop at the desired preset turn-off time. � Following options are available (time in minutes): 15 MIN p 30 MIN p 45 MIN p 60 MIN p 90 MIN p120 MIN p OFFp...... � will show on the display panel unless �OFF� is selected. To check or change the setting � Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear on the display. To cancel the sleep timer � Press TIMER/SLEEP repeatedly until �OFF� is displayed, or press the STANDBY ON button.
Viewing the timer 1
In standby mode, Press TIMER/SLEEP on the remote control to view timer. Timer will be shown on the display for 5 seconds and then go back to its previous status.
2
If the timer has not been set, �NO TIMER� will be displayed for 5 seconds.
