Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
When this has been done, all that is required is to periodically top up the container with salt. You are reminded of this by the salt indicator light on the control panel which will illuminate when the salt has finished. Important! The salt refill indicator light on the control panel can remain illuminated for 2-6 hours after salt has been replenished, assuming the dishwasher remains on. If you are using salts that take longer to dissolve then this can take longer. the function of the dishwasher is not affected.
The rinse-aid
The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically dosed in during the hot rinsing cycle. The storage compartment built in to the inside of the door can hold about 110 ml of rinse-aid, which will be sufficient for between 16 and 40 dishwashing programmes, according to the dosage setting.
Filling up the rinse-aid
1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The indicator (B) will be completely dark. Ensure that the lid is closed after every refill. Top up with rinse aid when the indicator (B) becomes clear. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Attention! Do not put liquid detergent in the rinse aid compartment.
BR01
