|
Dla tego produktu nie napisano jeszcze recenzji!
Option
Selector
Switch
Before starting
your dishwasher
3. Run hot water at sink nearest washer until it is hot. Turn it off. dish-
1. Spin the Upper Spray Arm to make sure nothing will stop it from turning freely 2. Close and latch the door.
Starting
your dishwasher
HEAVY WASH Cycle...
1. Make sure Cycle Control Knob points to dot marked HEAVY WASH. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle. RINSE &HOLD
USE AIR DRY
NORMAL WASH Cycle...
1. Turn Cycle Control Knob until it stops at dot marked NORMAL WASH. 2. Select option. 3. Without turning it, pull the Cycle Control Knob out to start the Cycle.
RINSE & HOLD Cycle...
1. 2. 3. 4. Select AIR DRY Option only. Unlatch door and open slightly Pull Cycle Control Knob out. Turn Control Knob clockwise to dot marked RINSE & HOLD. 5. Close and latch the door to start the cycle.
2. With the Cycle Control Knob pulled out, turn clockwise to the cycle you want. 3. Be sure the detergent dispensers are filled properly for the new cycle. 4. Latch the door to start the cycle.
Changing
a setting
You can change a setting any-time during any cycle. 1. Unlatch the doorto stop the cycle, but don�t open it until the spray arms stop spinning.
8
|
