TEAC GF-330
Instrukcja Serwisowa

GF-330

3-2 TURNTABLE SECTION
1. Set the function switch to the PHONO position. 2. Connect the oscilloscope to the speaker terminal. 3. Use a HP-4005 record for all adjustment.

PHONO SPEED PCB

VR601

VR602

VR603

3-3 CASSETTE DECK SECTION
3-3-1 Tape speed adjustment
1. Set the function switch to the TAPE position. 2. Connect the frequency counter to the speaker terminal. 3. Load tape deck with MTT-111N (use the midpoint of side A). 4. Press the PLAY button on tape and adjust MOTOR VR to obtain 3,000Hz +/- 30Hz. 5. Stop tape .

3-3-2 Azimuth adjustment
1. Connect the oscilloscope to the speaker terminal. 2. Load a MTT-114N test tape and press the PLAY button. 3. Adjust the azimuth using a screwdriver to maintain the max. L & R out voltage. 4. Secure the azimuth position using locking paint.

6