Quick Guide (Trying Out the Unit)
The Quick Guide explains the basic steps for using the GFX-8 in play mode. This lets you use the unit right away, to check out what it can do.
Selecting the patch/bank number/group
In play mode, the name of the currently selected patch is shown on the display. The group and bank number of the patch can be checked on the GROUP/BANK indicator.
Patch name
Quick Guide (Trying Out the Unit)
Group Bank number
To switch the patch within the same bank, press one of the foot switches 1 - 4 whose LED is not lit. * If you press the foot switch whose LED is lit, the GFX- 8
goes into the bypass condition.
To switch to a patch from another bank number or group, use the BANK UP/DOWN foot switches and the foot switches 1 - 4 to select the bank number and group. � For details on patch/bank/group switching, refer to p. 10.
To alter the effect with RTM
RTM (real-time modulation) refers to changing an effect with the expression pedal in real time. Rock the expression pedal back and forth. Push the expression pedal fully down.
Move back and forth The effect changes as the expression pedal is moved. The parameter that is controlled can be programmed for each patch. Try out this function to see which parameter changes for the stored patches.
Push fully down The expression pedal incorporates a switch that operates when the pedal is pushed firmly down. The switch turns the module for which RTM control is possible on and off.
� For information on effects that allow RTM control, see p. 30. � For more information on the use of the expression pedal, see p. 41.