WHIRLPOOL GL3030WL1
Instrukcja Obsługi

Caring

For Your Dryer
Cteanlng tha dryer Page ................... ..- .................. 10 ..� ................ 11 I I .................................. -9 Unt removal ................................

I

In This Section
Cleaning Unt screen

Page the lint scraen ..................................... 9 maintenance

I

Cleaning

the lint screen

The lint screen is located under a lid on top of the dryer. Clean ft before each load. A screen blocked by lint can increase drying time. 1. Open the lid and pull the lint screen straight out.

2. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint. Wet lint is hard to remove. 3. Push the lint screen firmly back into place and close the lid.

Lint screen

maintenance

Laundry detergents and fabric softeners can cause a residue build-up on the lint screen. A clogged lint screen can extend drying times. Clean the lint screen every six months or more frequently if ii becomes clogged due to a residue build-up. Use the following method: 1. Wet both sides of lint screen with hot water. 2. Wet a nylon brush with hot water and liquid detergent. 3. Scrub lint screen with the brush until all residue build-up is removed. 4. Rinse with hot water. 5. Thoroughly dry lint screen with a clean towel and replace in dryer.