1 Remote sensor/power lamp Point the front end of the wireless remote control toward here. When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode. 2 Self-diagnostic lamps (page 35) These lamps light/flash if something abnormal occurs with the Monitor. 3 2 / 3 / 5 / � buttons Use these buttons to select menu items and to make adjustments. � When no menu is displayed, you can use the 2 / 3 buttons to adjust the volume level. 4 MENU button Use this button to display or erase menus. While a sub-menu is displayed, pressing this button will move you one screen back to the preceding menu.
5 INPUT button (page 14) Use this button to switch between inputs. To select the COMPONENT or RGB B input, you have to set �RGB/COMPO.� correctly on the menu (see page 23). 6 POWER button (page 14) Use this button to turn on and off the Monitor.