Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
15
Video Light (GR-AX570 only)
When natural lighting is too dim, you can brighten the scene by using the built-in video light.
SET VIDEO LIGHT
1
Set the LIGHT ON/AUTO/OFF as required. ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject. OFF : Turns off the light. �The video light can be used with the camcorder�s power on. �It is recommended to set the white balance ( pg. 23) to indoor mode ( ) when you use the video light. �When not using the video light, turn it off to save battery power.
LIGHT ON/AUTO/OFF
NOTES:
� Even if the battery indicator ( ) does not blink in the viewfinder, if the battery pack�s charge is low, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on. � When the LIGHT ON/AUTO/OFF switch is set to �AUTO�: �Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using the LIGHT ON/ AUTO/OFF switch. �While the Sports or High-Speed Shutter mode ( pg. 16) is engaged, the light is likely to stay on. �While the Twilight mode ( pg. 17) is engaged, the light will not activate.
DANGER
�The video light become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result. �Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot. �When operating, keep a distance of about 30 cm. between the video light and people or objects. �Do not use near flammable or explosive materials. �It is recommended that you consult your nearest JVC dealer for replacing the video light.
