JVC GR-DVL157EK
Instrukcja Obsługi

EN55
SNAPSHOT Button

Dubbing Images Stored In A Memory Card To A Tape (GR-DVL557/DVL555/DVL357/DVL355 only)
Images can be dubbed from a memory card to a tape.

1 2
Lock Button Power Switch Rewind Button (2) Fast-Forward Button (3)

Load a memory card ( ( pg. 12).

pg. 14) and cassette

To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point. Set the VIDEO/DSC Switch to � �, then set the Power Switch to � � while pressing down the Lock Button located on the switch. To select a still image to be dubbed, perform Index Playback ( pg. 29), Auto Playback ( pg. 28) or press 2 or 3 to select the image you wish. To engage Dub-Standby, press SNAPSHOT. The message �TO COPY TO TAPE PUSH "SNAPSHOT"� appears. While the message is being displayed, press SNAPSHOT. The selected still image is recorded on the tape for approx. 5 seconds. �The indicator disappears when dubbing is complete.

3 4 5 6

2

3

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

NOTE: If SNAPSHOT is pressed in step 5 when the tape�s erase protection tab is set to �SAVE�, the message �COPYING FAILED� is displayed.

Display

TO COPY TO TAPE PUSH � SNAPSHOT �

REC