Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 48 (kliknij aby zobaczyć)
48
EN
LENS COVER Open/Close Ring
USER MAINTENANCE
After Use
1 2 3 4
BATTERY RELEASE Set to �POWER OFF�.
Set the Power Switch to �POWER OFF� to turn off the camcorder. Slide EJECT to open the cassette holder, then remove the cassette. Close and lock the cassette holder by pressing PUSH. Slide BATTERY RELEASE to remove the battery pack. Turn the LENS COVER Open/Close Ring to close the lens cover.
5
Cleaning The Camcorder
1 CLEAN EXTERIOR
PUSH EJECT Remove.
Wipe gently with a soft cloth. �Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.
2 CLEAN LENS
Blow it with a blower brush, then wipe it gently with lens cleaning paper. Turn the eyepiece counterclockwise and pull it out. Remove dust using a blower brush. Re-attach the eyepiece and turn it clockwise.
3 REMOVE EYEPIECE
4 CLEAN VIEWFINDER 5 RE-ATTACH EYEPIECE
NOTES:
� Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mould may form if the lens is left dirty. � When using a cleaner or chemically treated cloth, refer to the cautions that came with it. � When removing the eyepiece, be sure to hold the viewfinder securely.
