How Your Compactor Works
The compacting ram is the part of the compactor which compresses the trash. The compacting ram does not go to the bottom of the drawer. You will not see compacting of trash the first few times you load the compactor. NOTE: The compactor drawer should be more than ¹�� full before the compactor can begin to compress the load. You may hear a noise when glass breaks. Strong glass bottles may not break at all. The trash in a full compactor bag will be about ¹�� the size of its original bulk.
s s
s
Wrap or cover wet or messy trash. Do not compact items that may develop offensive odors such as raw meat, fish, grapefruit rinds, disposable diapers, or personal hygiene items. Load bottles or cans on their sides in the center of the drawer. Do not load bottles in an upright position.
3. Close the drawer.
Starting the Compactor
Load bulky trash, bottles, and cans in the center of the drawer. Bottles or cans not placed in the center may become caught between the ram and the drawer. The Drawer Monitor Switch then senses a �misload� and causes the ram to return to the �up� position without compacting. Depending on your model, you may have a single control (Style 1) or a dual control (Style 2) compactor.
Style 1 To start and stop the compactor
1. To start the compactor, turn the Key-Knob to START and then let go. The compactor will automatically stop at the end of the cycle.
Loading
IMPORTANT: Do not push items down into compactor with hands or feet. NOTE: You will not see compacting of trash the first few times you load the compactor. The compactor drawer should be about ¹�� full before the compactor can begin to compress the load. 1. Open the drawer. Lift and pull the handle or press the foot pedal to open the drawer. NOTE: Pressing the foot pedal opens the container only 3" to 6" (7.6 cm to 15.2 cm), depending on the load.
2. To stop the compactor during a cycle: s Turn the Key-Knob to LOCK/OFF.
s s
Then turn the Key-Knob to ON so the compacting ram will rise. When the ram stops rising, you can open the drawer.
To remove the Key-Knob
1. Turn the Key-Knob to the LOCK/OFF position. 2. Remove the Key-Knob and store it out of children�s reach.
