Installing the oven
The oven must be installed into cabinetry before use. Do not insulate the cabinet. This will prevent proper ventilation. If the oven is to be installed under a counter top, a sealing strip must replace the stainless steel rail above the control panel. The sealing strip offers additional protection from any liquids that might spill down from the counter top. The strip can be purchased from Miele. ^ Connect the oven to the electrical supply. The oven must be supported from underneath. ^ Place the oven into the cabinet as far as the oven trim and align.
^ Open the oven door and locate the two mounting screw holes in the oven frame. Mark and drill 6 mm pilot holes. Secure the oven to the cabinetry by inserting screws through the frame and into the cabinetry. Only operate the appliance after it has been installed into the cabinetry.
