Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
TRAY
1 two screws (PTPWH2.6 � 7)
2 chucking yoke (K)
6 damper (S) 7 lock lever
4 Pull the tray. 8 Remove the tray.
A
5 claw
7 lock lever 3 Rotate the control cam in the direction of arrow A.
� SUB CHASSIS INSTALLATION
Note: Follow the assembly procedure in the numerical order given. 2 Install the drive gear with gear position as shown in figure.
gear
3 screw (PTPWH2.6 � 16)
5 two screws (PTPWH2.6 � 7)
front side
4 sub chassis
1 Install the control cam with gear position as shown in figure.
