SONY HCD-DX90
Instrukcja Serwisowa

HCD-DX90
This section is extracted from instruction manual.

Step 2: Setting the time
You must set the time before using the timer functions. The clock is on a 24-hour system for the European model and a 12-hour system for other models. The 24-hour system model is used for illustration purposes.

3

Press ENTER.
The minute indication flashes.

4

Press . or > repeatedly to set the minute. Press ENTER.
The clock starts working.

1
� P p

5
Tip

2,4

=

+

3,5
p

If you�ve made a mistake, start over from step 1.
0 ) ( P

To change the time
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select SET CLOCK. 3 Press ENTER. 4 Perform steps 2 through 5 above.

Note

1

Press CLOCK/TIMER SET.
The hour indication flashes.

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

2

Press . or > repeatedly to set the hour.

7

5