Recording in changed order (PGM mode playback + O.T.E.)
It is possible to program the CD tracks and to record this program to an MD. The tracks of three CDs can be programmed and recorded to one MD. 1 Select the desired recording speed.w Perform the operations of steps 1and 2 on page 42 to select normal speed or 4x speed.
2 Set a recordable minidisc. ¤ 3 Set the disc(s) to the CD tray(s). 0 4 Bring the CD to stop status. 5 Program the tracks to be recorded. � Perform the steps 1 to 5 of "Listening to the desired sequence (program playback)" on page 36 to program the tracks. ÷ Recording will be done with the recording mode and the recording speed set in advance. Perform the operation of step 3 on page 33 to change the recording speed. ÷ Recording of the programmed CDs starts. ÷ When either the CD playback or the MD recording stops, the other operation also will stop. ÷ When this unit changes the CD automatically according to the program, the recording also is paused automatically and no unnecessary recording (parts without sound) is made. ÷ When the possible recording time or the possible number of tracks on the MD is exceeded, "DISC FULL" will be displayed and the recording will stop. ÷ O.T.E. recording in combination with repeat playback is not possible.
6 Press the "O.T.E." key on the remote control unit.
O.T.E.
Application
4 After completion of recording, press the 0 key to eject the minidisc.
(Main unit) ÷ Eject the minidisc after completion of the recording.
Always eject the minidisc after completion of the recording.
Cancel PGM mode playback.
PGM mode can be canceled by the procedure for "To clear the entire program".�
Interrupting a recording
When the STOP 7 key is pressed, the playback and the recording are ended.
