Instructions for Installation (cont'd)
3. Using the tube of sealant supplied, run an ample amount around the oval flare of the jacket, 6. The standard vent kit includes a 6° diameter extension pipe which is used when "E" dimension is over 6V2".
4. First remo e the 3 honzontaI extension from the elbow. Starting with the long end (with four securing holes), place the 6" diameter vent elbow over the 3" diameter elbow. Bend the round end "oval_ to fit the flared oval end of the jacket top. 7 I _] --_
X _ ,__ ,,
/
I
If_E " dimension is less than 6VI' move to next step.
extension pipe (crimped end) to the 6" diameter vent elbow and secure using two sheet metal screws. Using the tube of sealant supplied, run an ample amount around the joint to insure a good seal. _)_ If"E" dim ensionis over6_/I', assemble the 6" diameter
t
5. Making sure the 6" diameter elbow is centered around the 3" diameter flue, secure the 6" diameter vent pipe using four sheet metal screws at the connection of the jacket top. __ __
(_)-?__
_-'"
8. eSll_do;ihe vent collar (to be installed later)over the 6" vent