Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
Front Panel LED Indicators
The three lights on the front panel indicate the status of your TV.
POWER Press to turn the TV on and off. Remote Control Sensor Aim the remote control towards this spot on the TV.
: Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the unit will automatically be turned on in about 25 seconds. A cooling fan inside the set is not operating normally. Lamp cover on rear of the set is not properly shut. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. Lamp may be defective. Please contact a certified technician. � It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. � The TV has a fan to keep the inside lamp from overheating. You�ll occasionally hear it working. Indication
