Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 74 (kliknij aby zobaczyć)
74 EN
Error Code
ERROR CODE 102 SYMPTOM � When a signal in which only the analog information is copy protected has been input for the dubbing in D-VHS mode. � When a signal which is digitally copy protected has been input for dubbing in D-VHS mode. � When a signal which cannot be digitally converted by the recorder has been recorded.
TROUBLESHOOTING (cont.)
Some error codes may appear on the TV screen when operating the recorder. Refer to the chart below for the solution. SOLUTION It is not possible to record a digitally copy protected signal. It is not possible to record a digitally copy protected signal. Sometimes a programme can be recorded but not played back because the signal system is not supported by the recorder. Switch to analog input such as "L-1" to record. The recorder�s DV IN connector (i.Link) is especially for D-VHS recording. The digital signal is not converted to analog and then recorded. Switch to analog input such as "L-1" to record. Playback is impossible because a signal system not supported by the recorder has been input. The recorder is making adjustments in order to display normal picture. Please wait. This tape cannot be played back by this recorder. Nothing can be seen or heard because the signal system is not supported by the recorder.
103 104
105
� When making an S-VHS/VHS recording of a signal from DV IN connector (i.Link).
200 201 205 300
� When a signal which cannot be digitally converted by the recorder has been input and played back. � When normal playback is impossible such as with a mosaic (block-shaped noise). � When an attempt is made to play back a D-VHS recorded tape that has been found to be invalid. � When a signal which cannot be digitally converted by the recorder has been input.
