2 Turn the VOLUME/MULTI CONTROL knob
to select "O.T.E. MODE", then press the SET/DEMO key.
3 Turn the VOLUME/MULTI CONTROL knob
to select "NORMAL SP" or "HIGH SP", then press the SET/DEMO key.
If you are operating the remote, press the O.T.E. key. (Only "NORMAL SP" recording is available from the remote control unit.)
Turning the knob switches the display contents. 1 "NORMAL SP" : Normal-speed recording 2 "HIGH SP" : High-speed recording
The recorded audio may skip, noise may be recorded on the MD or unnecessary tracks may be created depending on the condition of the CD. In such a case, restart recording at the normal speed.
÷ After the track has been recorded, the MD recorder stops and the DVD/CD player enters pause mode. ÷ When either the playback of CD (MP3, VCD) or recording of MD is stopped, the other operation is stopped automatically.
To interrupt a recording
STOP 7
TUNING MODE
(Recording and playback will be stopped)
With certain tracks, when a track has been recorded in high-speed recording, the recording mechanism prohibits to start high-speed recording of the same track or high-speed recording of the disc containing the track in less than 74 minutes after the start of previous recording. In this case, the unit displays the time required till the high-speed recording can be restarted.
Wait
74min.
Application section
If you want to record the same track immediately after its high-speed recording, record it in normal-speed recording.
Do not turn power off or apply shock or impact while "WRITING" is displayed. If the power cord is unplugged before "WRITING" disappears, the recorded or edited data will be lost.
