PHILIPS HP4962/07
Instrukcja Obsługi

EnglisH

7

-

-

RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. Never block the air grilles. This appliance is equipped with an overheat protection device. If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair, etc. Always switch off the appliance before you put it down, even if it is only for a moment. Always unplug the appliance after use. Do not wind the mains cord round the appliance. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Do not insert metal objects into the air grilles to avoid electric shock. Keep the hairdryer clean and free of dust, dirt and styling products such as mousse, spray and gel. Noise level: Lc= 79 dB(A) for HP4960 Noise level: Lc=80 dB(A) for HP4963/HP4962/HP4961

electromagnetic fields (eMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. general description (Fig. 1)

A B C D E F

Concentrator Air outlet grille Air inlet grille Rocker switch with 2 heat/speed settings and off position Cool shot button (HP4962 only) Volume diffuser (HP4963 only)