|
Kto jest w sklepie?
Sklep przegląda 5638 gości
|
Kategorie
|
Informacje
|
Polecamy
|
|
|
|
|
Dla tego produktu nie napisano jeszcze recenzji!
;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
44 EN
MENU
M B E R " 8 "
TIMER RECORDING (cont.)
You can directly program the VCR�s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 7 or 9).
C H
On-Screen Timer 1 Programming
N
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. � The VCR comes on, and the counter is reset, automatically.
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
ACCESS ON-SCREEN MENU
2
OK
¢ ¢
Press MENU as many times as necessary to bring up the Main Menu screen.
ACCESS PROGRAM SET SCREEN
q
2
2
3 4
Make sure the highlight bar (arrow) is on "PROGRAM SET", then press OK.
SELECT PROGRAM NUMBER
Press the appropriate NUMBER keys or CH5� or TIME SCAN% � to select a vacant program number, then press OK. The first time you set the timer programming function, all the PRESS NUMBER KEY (O�9) OR (5,�), THEN (OK) program numbers will be PRESS (MENU) TO END blank; in this case just press OK when the Program Set screen appears.
DATE START STOP CHANNEL PROGRAM 1 � �/� � � �:� � AM � �:� � AM � � SP
1 4 7 8 0
2 5 9
3
6
NUMBER NUMBER "9"
SET PROGRAM INFORMATION
CH
1 ¶ 4
5
3 7 8
¡
Press the appropriate NUMBER keys to set the date, start/stop time and channel number. Press CH5� or TIME SCAN% � to set AM/PM and tape speed (SP or EP). Press OK after AM/PM, channel number and tape speed settings. * If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page. � Any information comprised of 1 digit (except the channel number) should have a "0" entered before it. � It is possible to set all information using the CH5� or TIME SCAN%� button. (In this case, press OK after each setting.) Do not use the CH � or TIME SCAN� button to set the date. � At the Program Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item. ** You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key "WEEKLY" or �9� (WEEKLY). Either "DAILY" or�8� (DAILY)appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.
U
¢
MENU OK
TIME SCAN
EXAMPLE
If you program the VCR to timer record a show on December 24 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:
PROGRAM 1 DATE START STOP CHANNEL 12/24 12:00 1:00 40 WED PM PM SP
PRESS NUMBER KEY (O�9) OR (5,�), THEN (OK) PRESS (MENU) TO END
|
|
|
> |
|