Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
12 EN
PLAYBACK
The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is point toward the recorder. Don�t apply too much pressure when inserting.
Basic Playback
T O
LOAD A CASSETTE
1
Turn on the TV and select the VIDEO channel (or AV mode).
R E W
� The recorder power comes on automatically and the counter is reset to 0:00:00. � If the record safety tab has been removed, playback begins automatically.
8
2 3 4
6
5/8
1 ¡
STOP/EJECT
q
If the tape is advanced past the start point, press REW or turn the TIME SCAN SHUTTLE ring to the left. To go forward, press FF or turn the TIME SCAN SHUTTLE ring to the right.
FIND PROGRAMME START POINT
PLAY
TIME SCAN SHUTTLE
START PLAYBACK
Press PLAY. �BEST� appears blinking in the recorder's display panel during automatic tracking. ( pg. 22)
FF
STOP PLAYBACK
Press STOP on the remote or STOP/EJECT on the recorder�s front panel. Then press STOP/EJECT to remove the cassette.
2
1 4 7
2 5 8 0
3 6 9
4
Usable cassettes
S
P L A Y
FF REW
3
1
� Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette. � This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.
