9
The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is point toward the recorder. Don�t apply too much pressure when inserting.
Basic Playback
SHUTTLE
6
q
PLAY
STOP/EJECT
OT
A L P
S
LOAD A CASSETTE
1
� The recorder power comes on automatically and the counter is reset to 0:00:00. � If the record safety tab has been removed, playback begins automatically.
2 3
If the tape is advanced past the start point, press REW or turn the SHUTTLE ring to the left and release it. To go forward, press FF or turn the SHUTTLE ring to the right and release it.
FIND PROGRAMME START POINT
START PLAYBACK
2
1 4 7
2 5 8 0
3 6 9
Press PLAY. �BEST� appears blinking in the recorder's display panel for 5 seconds. ( pg. 15)
STOP PLAYBACK
4
FF
Press STOP on the remote or STOP/EJECT on the recorder�s front panel. Then press STOP/EJECT to remove the cassette.
Y
Usable cassettes
REW
P
3
1
� Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette. � This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.
