Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Editing
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components� instruction manuals for connection and its operations.
B Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
C Select input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select �F-1� � when connecting the other VCR to the audio/video input connectors on the front panel. On the Remote Press AUX or CH+/�. On the VCR Press PAUSE[CH], and then FF[CH+] or REW[CH�]. See step B in �Basic Recording�.
A Make connections
Example: When using this VCR as the playback VCR
This VCR (for playback) To AUDIO/VIDEO OUT
D Select edit mode
Set the edit mode to �ON� for the VCRs if such a mode is equipped. � On this VCR, set �PICTURE CONTROL� to �EDIT�. Audio/video cable (not supplied)
E Start playback
Press PLAY (4) on the playback VCR.
F Start recording
Press REC (7) on the recording VCR.
To audio/video input Another VCR (for recording)
� When using this VCR as the recording VCR, connect this VCR�s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
