JVC HR-J4405UM
Instrukcja Obsługi

24 EN

TIMER RECORDING
Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. ( pg. 24 or 28) The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCodes are the numbers next to the programs in most TV listings.)

VCR Plus+ Timer Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

LOAD A CASSETTE

1 2

Make sure the record safety tab is present. � The VCR�s power comes on automatically.

Press PROG. on the remote control. � The clock must be set in

ACCESS VCR PLUS+ SCREEN
VCR PLUS+
order to access the VCR Plus+ screen. If you PRESS NUMBER KEY (0�9) haven�t set the clock, the PRESS (+/�) TO SET Main Menu screen EXPRESS PROGRAMMING appears after an error PRESS (PROG.) TO END message is displayed. Refer to page 6 for the Plug & Play procedure or page 9 for the clock setting procedure.

C H

3
1 4 7
CANCEL

2 5 8 0

3
2

6 9
4

NUMBER

Press the appropriate NUMBER keys to enter the VCR PLUS+ PlusCode number printed 123 in the TV listings for the TV program you wish to record and press OK. If the Guide Channel Set PRESS NUMBER KEY (0�9) THEN (OK) screen appears, go to step PRESS (PROG.) TO END 4. If the VCR Plus+ Program screen appears, go to step 5. � To make corrections, press CANCEL and input the correct PlusCode number.

ENTER PLUSCODE NUMBER

PROG.

1

INPUT RECEIVING CHANNEL NUMBER

4
3

OK

PUSH JOG

The Guide Channel Number, which is assigned to the TV or cable station for the PlusCode number that you entered in step 3, will appear automatically on the Guide Channel Set

GUIDE CHANNEL SET GUIDE CH: 12 VCR CH : �� �

screen. Input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or cable box using the NUMBER keys, CH5� or PUSH JOG %� , then press OK. � The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the Guide Channel number has not been set already.

PRESS NUMBER KEY (0�9) OR (5,�), THEN (OK) PRESS (PROG.) TO END