Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 64 (kliknij aby zobaczyć)
22 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Record One Program While Watching Another
Recording Features
� �:� � TV/VCR
1
During recording... � Press TV/VCR. The VCR's VCR indicator goes out. (If you are using the RF connection ( pg. 4) to view the output from your VCR, the TV broadcast being recorded disappears.) � If you are using the AV connection ( pg. 4) to view the output from your VCR, change the TV's input mode from AV to TV.
ENGAGE TV MODE
SELECT CHANNEL FOR VIEWING
Use the TV�s channel selector to set the channel you
1 4 7
0000
2 5 8 0
3 6 9
4 2
2
want to watch.
1
Display Elapsed Recording Time
1
3
Before recording starts, press 0000. The counter resets to zero and displays the exact elapsed time as the tape runs.
RESET COUNTER TO ZERO
2
During recording, press � �:� � at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press � �:� � again to remove the display.
DISPLAY ELAPSED TIME ON SCREEN
� Make sure "SUPERIMPOSE" is set to "ON" ( pg. 18). � The indications are not recorded. � Each time you press � �:� �, the indication on the front display panel will also change as follows: counter reading = channel number = clock time. (Channel number is not displayed during playback.)
