Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
14
PLAYBACK (cont.)
Manual Tracking
Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.
6
V I
q
TV PROG.
1 2
OVERRIDE AUTOMATIC TRACKING
Press SP/LP on the remote to engage manual tracking.
R E
EW
ADJUST TRACKING MANUALLY
Press TV PROG. + or � to adjust tracking.
REVIEW
2
1 4 7
2 5 8 0
3 6 9
RETURN TO AUTOMATIC TRACKING
Press SP/LP on the remote to re-engage automatic
3
TV PROG.
tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic tracking mode automatically.
SP/LP
Instant ReView
3
1
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
ACTIVATE INSTANT REVIEW
1
Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it�s found, playback begins automatically. The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, �REV 3� appears and blinks. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.
NOTES:
� Instant ReView is not possible while the recorder is in the Timer mode. � The number displayed on the front display panel may not match the actual number of timer-recorded programmes when one or more of them is a PDC recording ( pg. 33).
